Skis for skating stroke: the right choice, preparation

How to choose skis for skating course and not to be mistaken? The choice of skis - not an easy task, especially for beginners. Purchase of sports equipment requires the use of a competent, responsible and balanced approach.

How to choose skis for the beginner of skating?

Skis for skating stroke: the right choice, preparation

The first difficulty may arise directly when determining the products that fall into the category of cross-country. Often refer to this type of model, different structure from skiing. In this case, a novice is to anything professional skiing to skating progress, at least at least on the basis of their high cost.

The person who just gets on skis, you must first determine the affordable price range. The cost of some models of skis for skating stroke may range from 30 to 350 dollars. And even when the value of a particular purse the most expensive models from reputable world manufacturers are not always the ideal solution.

What skis for skating stroke is better to choose? The optimal solution for beginners can be a cross-country skiing to skating stroke of domestic production. Firstly, the average quality of these models allows you to experience the whole range of positive emotions from driving, and secondly, their cost is so available that use these skis can be sparing, in virtually any environment.

Another important issue is the selection for the novice country ski based on the technical parameters: length, degree of hardness, strength of the structure. These characteristics are the decisive when choosing any models.

The optimal length of the ski to the skating stroke may be determined by the classical formula for calculating. To this must be added to increase the skier 25-30 cm, which will be an indicator of an appropriate length. As for the stiffness of skis, there is a need to focus on the weight of the skier. Under too bulky soft rider models will certainly bend, bringing a whole lot of inconvenience. With a low weight of the skier is too tight inventory will slip with a rather unpleasant impact. To determine the optimal level of rigidity enough to ski the full weight of previously tucked under mounting area heavy paper. Sufficient rigidity index is considered, if the sheet without difficulty can move under the sliding surface a distance of about 30-40 cm in both directions.

Skis for skating stroke: the right choice, preparation

The bulk of buyers prefer to immediately purchase for the drive at the primary level expensive skis for skating move, hoping for a comfortable feeling while riding on the authority of a recognizable manufacturer. However, the reliability and high quality expensive ski justified by the need to achieve maximum speeds on the track. It is hardly a beginner immediately be able to ride at such speeds with the use of proper technique drive. Therefore, to spend money on the purchase of a professional ski man model makes no sense without much experience.

Materials manufacture

In implementing such procedures, the choice of skis for skating course, an important issue for most beginners is the selection of a suitable material. Many of us still remember the good old wooden models of cross-country ski Soviet production, which at one time there was virtually no alternative. Therefore, some sports fans is extremely difficult to accept the need for the transition to the use of modern plastic models. The main reason here is not the rigidity of perception, but rather a lack of information about the features of this equipment use.

Skis for skating stroke: the right choice, preparation

Plastic skis of skating is not as simple as it might seem at first glance. Using a model without proper preparation and care, you can feel uncomfortable, persuading himself in a failed purchase of the very first meter gauge.

In fact, plastic is characterized by improved sliding properties compared to wood. Therefore, when choosing a plastic cross-country skiing to be ready for the necessity of regular lubrication of the sliding surface of the product, selecting the appropriate composition and based on the weather conditions and terrain.

Plastic model of cross-country skiing is much stronger than wood and, therefore, have a high level of reliability. And if the owners of the first beginning to shroud their favorite tools with the advent of plus indicators on the thermometer, the happy owners of plastic counterparts normally for a while pleasing yourself a continuation of the season.

How to choose skis of skating under the style of driving?

One of the defining moments in the selection of skis is to match the selected model style of riding. Consider individual characteristics and skis recommended configuration, because of the nature of the acquired pair future use.

Selection of skating skis should be carried out, focusing on the features of the style of driving, which is characterized by the need to perform sweeping movements of so-called "Christmas tree".

The main difference between the classic skiing and skating models for stroke are especially for lubrication. To achieve maximum uniform sliding surface is treated with primer ridge ski as ointments holding, lubricated with paraffin over the whole length, additional processing special lubricants slipping. At the same time, this treatment is not allowed for the classical models of skis, sliding surface which, on the contrary, the skins to achieve greater cohesion, and then covered with holding lubricant. To choose skis for skating course to be used for driving in the running style, you must pay attention to the most durable product that can withstand considerable loads.

In general, experts recommend to buy several sets of skis for skiing traditional ridge and cross-country course. Such a solution would avoid the difficulties and discomfort, having the ability to switch from one course to another.

Ski Boots

Skis for skating stroke: the right choice, preparation

The most important process, along with the direct choice of cross-country skiing, is the selection of a whole range of essential accessories: fastening, boots, poles, other things. Innovative models of ski boots are not just special shoes for easy connection to the skiing, but also products that can protect your feet from certain loads and maintain the heat balance.

In the production of modern ski boots accounted anatomical foot skiers and natural hygiene requirements. Selection of high-quality, secure boot is the key to a comfortable, successful drive. Responsible approach to the selection of shoes eliminates the need to be distracted by all sorts of inconveniences as a muffled fingers or legs soaked.

Currently, there are several main categories of ski boots:

  1. The classic model - traditionally used for ski models, which are used for driving a classic swing.
  2. Skating boots - the structure and functionality of the equipment corresponds to features of skating.
  3. The combined model - can be used to drive in a variety of styles, thanks to the convenient removable cuffs.

Mounts

Making selection of skis for skating stroke, you need to think about the selection of suitable fasteners. To date, allocate standard and specialized types of fasteners. Standard mounting suggest a connection to the boots with the help of the holes, which are available under the connectors on the bottom of the special shoes. Such attachment also have protrusions, due to which, in fact, there is a reliable fixation of a ski boot.

Specialized systems have the same rubber elements of varying stiffness, which provides high efficiency when running repulsion. Under profile shoes has several separate mounting options - NNN and SNS. The difference between these types of specialized fasteners is the number of recesses. The format NNN bindings are two of them, and in SNS-bindings only one.

Ski poles

When choosing the best skis for skating course, you should pay attention to the choice of the most convenient, efficient sticks. In many ways, the choice of sticks depends on riding style. Classic riding style most appropriate choice of sticks, the length of which reaches the armpits, and the "ridge" is recommended to select the stick up to shoulder.

Skis for skating stroke: the right choice, preparation

The ideal solution can be considered the selection of sticks with anatomically verified knot and large paws. The presence of these characteristics makes it possible to ride for a long time, almost without feeling tired or uncomfortable sensations in the hands.

How to prepare your skis for skiing ridge course?

Preparing for ski skating stroke involves first creating a structure of the sliding surface, which is the most consistent with the nature of snow. For this purpose, the outer plane of the ski is treated with special materials in the form of ointments and paraffin, which are selected based on the weather conditions.

First of all, on the sliding surface of skis applied ointment holding firm. It carries out the procedure in the following order:

  • outer plane skis processed sandpaper, which improves adhesion through raising the nap;
  • deposited dirt razogretaja ointment consistency best suited to weather conditions;
  • ointment leveled iron medium temperature;
  • after setting the following layers are applied in ointments holding zone and leveled synthetic cork.

paraffin deposition on the surface of skis

Lubrication of skating skis with a sufficiently soft paraffin may be produced by superimposing it on the sliding surface in the cold. If the ski is processed using a hard wax, in which case recourse to heating by means of iron lubrication. Alternatively, the lubricant for ski skating stroke may be performed by brief heating of the bar of paraffin wax, followed by treatment of skis smooth strokes.

Skis for skating stroke: the right choice, preparation

Apply to be an amount of ski wax to a molten state lubricant is uniformly spread over the entire sliding surface, a layer of material should be no more than 1 mm. Leveled it all the same hot iron.

Preparation of skating skis by applying lubricant in the form of heated wax iron is the most dangerous procedure. If inaccurate approach to step there is a high likelihood of overheating and burnout of the high strain plastic. Therefore, when applying the wax is strongly recommended to set the lowest possible iron temperature at which fusion is possible existing paraffin.

Conduct an iron on a sliding surface of the ski is necessary smoothly and without delay. Thus between the plastic and the sole plate must be wax layer, because plastic burning quickly gives case of direct contact with the heated surface of the iron. On this basis, it is not necessary to save on paraffin flow rate, as this often leads to more serious material losses in the form of damage to equipment.

Purification of special brushes ski surface

In cases where the entire length of skis for skating stroke is machined on special grinding machines, it becomes possible to form a complex or a large fine microstructure surface. Such treatment promotes optimal allotment of liquid and air in contact with snow skis, which ensures the best possible sliding.

After removing the old wax residues with a scraper with the arrival of the new season is still quite small grooves filled with lubricant. To resume the original structure of the surface remains of wax skis, remove rotary or hand brush. The most effective may be the use of hard metal or nylon brushes, which are characterized by fine hair.

When cleaning of paraffin brushes sliding surface is not suitable for too zealous, carrying out sudden movements or excessive pressure in order not to damage the plastic structure. The most effective villi metal and nylon brushes clean off wax residues when they are placed at a right angle to the work surface.

Simple Tips on preparing skis

Skis for skating stroke: the right choice, preparation
  1. to apply the base layer as a primer ointment is better to use a special iron, as the majority of irons for ironing is not possible to establish an optimum temperature.
  2. Latency heated soleplate at one point ski surface often unfortunately leads to burnout and plastic deformation.
  3. Before applying the ointment slip when preparing skis to skating, you must activate the surface, once again treating it with a brush.
  4. When preparing skis for skiing in freezing is better to resort to the creation of a fine structure of the sliding surface, and in warm weather - to use a large surface texture.
  5. Of great importance in the preparation of the sliding surface is the use of trial and error. In other words, it is necessary to try on personal experience different combinations of lubricants under various weather conditions.
  6. Before the necessity of long-term storage of skis is not necessary to clean off old wax, which will act as a protection of the sliding surface in the offseason.
  7. It is recommended to initially show the utmost concern for skiing, because only in this case we can hope for their long service and maximum enjoyment in skiing.