How to wind the fishing line onto the spool: basic ways

The invention is a fast-response spool considerably easier fishing. Now you can easily make long and accurate casts. But how to wind the fishing line on the spool? We talk about it further.

How to wind the fishing line onto the spool: basic ways

The reasons for the replacement of fishing line on the spool

Each fisherman using spinning reels, when catching fish unforeseen circumstances leading to the main line tangling. Such moments of the season will be typed much. When untangling knots inevitably arise that have a negative impact on the work equipment - reduced casting distance, unskilled assembly weakens the main fishing line. All these factors can play a cruel joke when playing captured the tail.

Seasoned fishermen always advise rewinding the line on the spool, in other words, to change completely. For experienced anglers fishing line rewinding it is not difficult, but for novice anglers the question arises - how to wind the fishing line onto the spool. In fact, this operation is very simple.

The apparatus spinning reel

In the Russian translation of the root of the "spin" is translated as "rotate" or "rotate". The task of the coil - relatively quickly assemble a scaffold on a certain device for storing even layers and eliminate tangles during uncoiling. Another important feature - is to ensure unwinding of the fishing line of least resistance, it is important to carry out casting bait or lures when fishing. Standard coil consists of:

  • of the main body, which houses all the gears and bearings, which convert the rotation of the handle in the rotational-translational motion of the spool with leskoukladyvatelem;
  • the spool assembly with the device leskoukladyvatelya - it guides the fishing line so that it is laid flat ring in the channel of the spool.
  • clutch - an important device allowing the withdrawal of large fish without the risk of equipment failure.

In addition to the devices described above, a part of the modern coil there are many assistive devices that greatly simplify the process of fishing, but their availability depends on the manufacturer and model of the coil itself.

How to wind the fishing line onto the spool: basic ways

Methods for winding fishing line onto the spool

Wind the fishing line onto the spool in one of three ways. Selection of a particular method depends on the spool and rigging for which it is intended.

For a simple coil with a cheap fishing line, for fishing in the small pond of small fish is fine budget option, but for catching large fish and require careful use of expensive fishing line and reel premium.

  1. The first method - the usual standard winding fishing line on the spool cheap.
  2. The second method - road winding fishing line onto a substrate.
  3. The third method - the use of take-up.

How to wind the fishing line onto the spool: basic ways

The general principles of the fishing line wound around the bobbin

Correctly wind the fishing line onto the spool few simple tips will help. Reliable and uniform laying of line possible with a mild tension fishing line during its winding. This can be achieved in several ways. You can ask someone for help - as long as you twist spinning assistant will hold the reel. How to wind the fishing line onto the spool without any help? In the case where the attraction side of the face is impossible, it is useful deep bowl. It pour water and suffer him reel. Water has a high resistance which is sufficient to tension fishing line, besides the reel during unwinding will not ride and shoot down all around. This method is good by the fact that the wet line was better stacked in layers.

How to wind the fishing line onto the spool in such a way as to provide the maximum range of a throw? The answer to this question may be the fact that the main resistance that dampens the energy of the cast - it is the friction of line on the spool rim. Accordingly, the smaller the distance the collar defined between the bed and the fishing line wound around the bobbin, the farther will be cast. The ideal thickness is 1 millimeter. This is enough to spontaneously fishing line does not fly, but at the same time and not rubbing against the edge of the rim.

How to wind the fishing line onto the spool: basic ways

winding fishing line onto the spool Buckingham by

You are using an expensive form of fishing line and reel holds a 150-180 meters of line and out of it is only 50-60%. What to do to not spend the extra money? How to wind the fishing line onto the spool, the working part of the fishing line has been in the work area. It should do this by domotki. This means that the part of the main line, which is not used, is replaced by the cheapest and mostly serves as ballast.

How to wind the fishing line onto the spool and trim where to start? You should start with fixing thread on the trimmer. This can be done either with a double knot, either self-locking collar. This is followed by the main spool working thread. At the end we will have a ledge of considerable size. How to wind the fishing line on the spool, to get rid of it? For this we need the same fishing line or any other. The quality of the fishing line, which is used to domotki, is not critical. Winding transoms occurs until the rim thickness of 1 millimeter, after which the resulting cake is rewound on another trimmer.