Boxer briefs. Boxer shorts men: Pattern

What is interesting in the wardrobe of both men and women by variables lead shorts. Yes Yes! And there is nothing surprising here! Because underwear is used daily by each of us, without it can not do.

boxer

Boxers (pants) - one of the classic types of men's underwear. Characterized by such a wide variety of models, in which a representative of the strong half of humanity will find exactly what he likes. Boxer inherent practicality, comfort and beauty.

The modern textile industry and innovative technology developed to such an extent that, in order to buy men's boxer, it is not necessary to carve out precious time from busy schedule with a view to go to the market or trips to the supermarket, shops and boutiques. Boxer shorts can be bought, while in the workplace or at home sitting on a comfortable sofa. The main condition - the presence of Internet access.

Still, "there are women in Russian villages" who prefer to sew boxer shorts for men alone.

How to choose the fabric

Fabric - a key element needed for any sewing clothes and linen. The choice of fabrics for men's boxer shorts depends entirely on personal preference. May vary as the type of fabrics and colors (monochrome, color, patterned and t. D.). For the hot season of the year the best is cotton, for the winter period - flannel.

Step by Step

1. Select the fabric. In most cases, preference is given to cotton. You can experiment.
2. Simulate the pattern. There are two ways: on the basis of measurements and using existing boxer shorts.
3. Pattern men's boxer shorts is transferred to the fabric.
4. cutting.
5. to sew.

How to take your measurements

must be removed before the measurements are cowards Pattern:

• FROM - waist - should be measured centimeter. Stroke measuring tape around her waist. Measurements are made in the narrowest point of the waist, as a rule, to the navel.
• ON - hip ratio - measured in centimeters maximum convex thighs.
• The length of the pants - measured on the man. Begin froze indicator should be on the waist line, and the final mark is determined on an individual basis.

boxer shorts for men: Pattern

Pattern underpants includes two stages, which should perform alternately:

1. Modeling pattern pants. The following parameters are defined and applied to a sheet of paper:

• The starting point "A". Apply on the sheet in the upper left corner. From this point, draw two guides - to the right and down.
• The length of the pants. From the starting point "A" to measure down the length of the underpants take your measurements (28 centimeters).
• step line. From the starting point to measure down 1/2 ABOUT removed by the standards of + 3 cm.
• waist width of the front of the men's boxer shorts. From the starting point "A" to the right to measure 1/2 ON to lift the standards of + 3 cm.
• In steps of the front of the pants. Calculations are made based on ON: ON / 10 + 0, 5 cm.
• Create the back of the underpants.
• The step width rear portion of the panty (4 cm).
• Elongation line the back of the pant step 1 cm.

Pattern male boxer shorts is composed of the front portion, which is sewn in the middle inguinal insert whole rear portion and the insertion connection.

Here is a sample pattern:

2. Pattern boxer shorts. Modeled the pattern should be put on the fabric and cut out so that the shorts turned on at the side seams. If you have enough fabric, the pattern pant can be made on a gross basis, that there were no side seams.

When cutting the product, please make allowances:

- at the bottom hem - about 2 cm;

- on top of the assembly - about 4 cm;

- the remaining seams - about 1 cm.

Why bother with unnecessary measurements and drawings? After all, you can get ready boxers shorts and cut out the fabric on them.

Tailoring pant

The necessary tools:

• pattern;
• tissue;
• thread;
• invisible;
• gum;
• needle;
• sewing machine.

So, there is pattern of men's boxer shorts: the front part of the two sides and the crotch insert, rear and insert connector. It is possible that the front side and the back of the segments are cut from whole cloth.

First, connect the parts to be the front of the pants - stitch side of the groin to insert. Next, take the insert connection and sew it first to a bottom front portion of the panty and then to the bottom of the back.

Now, it remains the case for small - to sew the front and back parts of the article and insert a rubber band at the waist (or stitched gum strip).

Men's underwear, their hands linked, ready!

Similarly, you can make boxer shorts for boys. tailoring the technology is identical, just different sizes (by the way, sew children's boxer shorts is only one option - hip ratio) and the amount of materials needed. But in any case, to sew adult or children's boxer-briefs, substantial costs will be.

Tips & Tricks

Boxer shorts - it's underwear. It is therefore important that the fabric has natural and does not contain synthetic impurities.

When removing the yardsticks and building patterns must take into account the degree of the selected tissue elasticity, as well as to take into account the fact that underwear should not completely encircle.

The fabric used for sewing underwear, should be good to stretch, breathe, keep in shape and no shedding. Therefore, conventional jersey as the starting material for the given type of needlework is clearly not fit.