How to tie a hook on the line? Effective ways and instruction

How to tie a hook on the line? This conventional and at the same time complex issue of concern to many people. Today, there are many ways to help you learn how to tie the hook to the line of varying thickness.

The features and the importance of proper node

When the unit is fastened properly and tightly, it can be considered reliable. Every fisherman must remember that tied knots will weaken the strength of the leash. This is due to the fact that there is a fatal sectional deformation that occurs during tightening fishing line.

How to tie a hook to the line and the right to form a strong unit, shown in the photo. Step by step instruction is a teaching material, which discloses all the tricks and techniques for creating lasting unit. Many beginning fishermen ask the professionals: "Do you need to learn all the techniques of setting?". Experienced anglers are advised not to spend time to learn all sorts of ways. Simply choose the most suitable and desired node, which then will always be used on a fishing trip. Considerable importance is the acquisition of skills. In such a case, the quality is significantly improved, reliable and knot strength, and time costs are reduced.

Light and widespread species of nodes

There are different sites for fishing line, which differ in technique and method of knitting. Below are the easiest technique for performing fastening hooks:

• Simple vosmerochny unit is easy enough. Take one end of the scaffold, it is an ordinary double knot. This is necessary in order to bore through the interior could miss the other end of line again. It should be noted that the loop is to be unfolded to form eight. There need to insert the hook forearm. When all phases of the work performed, it is possible to pull the ends to tighten the finished knot.
• Double vosmerochny node. It has some differences from the simple, which lies in the fact that the fishing line to the edge of the loop to skip exactly twice. Further, the fore-end of the hook should be covered by stranding. After completing all the stages of the work end of the line can be tightened. How to tie a hook on fishing line vosmerochnym double knot on the first try? Are properly do everything right the first time turns out not at all. Only experienced skill comes.

Presented nodes will be able to engage even novice anglers, if it will be done carefully. They are easy to run, perfectly hold the hook, and are not subjected to deformation of the line.

Forms with missing nodes

1. assembly with the inner pass. Along the hook shank is necessary to impose a long loop in the direction of hooking. At the same time the head of the hook is better to keep the toes. Next is taken short end of the fishing line and hook forearm to perform the winding several times. End of line required to put through the buttonhole. Tighten node must very carefully, while holding both ends.
2. node with the outer end of a pass. The loop is held with two fingers near the hooking. Next you need to wrap it with the gun, using the short edge toward the head. End of line necessary threaded in a loop, which is formed near the hooking. Delayed assembly similar to the previous method.
3. node with the internal pass both ends. When formed crossing a large loop, it is necessary to impose the forend hook. Near finger to wind the first and second side branch. The work is done with the gun several times. All the end of the fishing line to tighten the usual way.

Only professionals and visual aids to help the novice fisherman to answer the question: "How to tie hooks on a fishing line with a pass?". Experts say that the submitted sites require human care. It is necessary to impose the turns slowly, so they do not damage the line. If they run against each other, then the node it is necessary to tie up.

Technique of the right node

Correct node must maximize securely connect to lure or swivel. The method described below is suitable for monofilament and braided fishing line. So, how to tie a hook to the line:

1. Lesko need to be folded in half and thread the loop through the eye of a separate swivel. It must have a single turnover.
2. The loop returns to its original position where it is folded in half to the main line. It should be possible to hold the stronger hand one end of the loop and a folded main line. The end result is a double loop should get.
3. The free hand should flow through the swivel double loop.
4. need to capture the swivel using pliers to tighten the knot as firmly as possible. The line should be dampened. Both ends of the fishing line it is necessary to retain and slowly but firmly tighten the knot.
5. The formed coils must be moved in the direction of eye swivel.

All the steps above instructions must be repeated at least six times.

Fulfilling all the action slowly, beginner fisherman will understand how to tie a hook on the line correctly and securely.

Tips specialist knitting unit

During assembly of knitting need to adhere to the basic rule that deals with tightening. Before you get started, nodules better moisturize. Only in this way will achieve maximum strength.

Experts recommend delaying as slowly as possible, without having to take the time to once again not to heat up the line. It is worth noting that at the bottom or in the middle of the nodes will be different. It is considered the norm. On monofilament is no need to spend additional sizing. Thus, it can increase its fragility.

The finished work should have the sequence - assembly, hook, fishing line.