Jig: types, description, selection of tips on how to use

Man invented many ways to catch fish. One of the most popular types of fishing is considered to be spinning. According to experts, a good catch does not depend only on the quality of baits, but also on such an element gear like jig. With the help of this small sinker can be corrected to improve even the most unpromising fishing. about the kinds of information, forms, jig-heads and their application is contained in the article.

Jig: types, description, selection of tips on how to use

Introduction

Jig is one of the spinning elements in a display sinkers. It is characterized by a certain form and method of attachment hooks. Since the place of fixing the sinker was the head of the bait in the fishing environment, this snap-called "head." Its mission - to increase the weight of the fishing line with a hook and deliver it to the desired depth with the bait. Jig is designed for use with spinning. Luring carried out by means of silicone and foam rubber fish, which are considered the catchability for jig fishing. Classification heads carried by parameters such as shape, weight, material, mounting method and position relative to the hook.

On the mass of the load

Weight is considered an important parameter, which will depend on how quickly tackle plunge into the water and how far it will be possible to throw. Experienced fishermen recommend when choosing a jig-head to take into account the time of her burial, which on average should be from 2 to 5 seconds. However, this figure may vary depending on environmental factors and local conditions. According to such a parameter as the weight jig heads may be:

  • easily. Their weight ranges of 7-21
  • Average. Weigh up to '42
  • hard. Weight of the goods exceeds '42
Jig: types, description, selection of tips on how to use

In addition, on the shelves of specialty stores are presented head to those who practice the style and nanodzhig mikrodzhig. Weigh weights before and three to seven grams.

On the product of lead

The most popular are jig-heads, made of lead. Due to its low melting point, compliance with the treatment and the severity of large active material was the most suitable for manufacturing Jigs. In addition, lead inexpensive: it can buy anyone who has decided to make snap home. Lack of lead is that after some time the white coating formed on its surface.

About tungsten sinker

As a material for manufacturing jig apart from lead, tungsten another use. In comparison with lead it is heavier, because it has a higher density. For example, in 1 cu. for 11 m, 3 tons of lead, tungsten -. 19, 3. As a result, the same weight tungsten jig heads are more compact and very convenient when performing casting over large distances. This nuance is important, because sometimes it is necessary to add in too small a heavy jig bait. Earlier, when used only to lead, the head gets too cumbersome and often scare away the fish. Since tungsten has changed for the better. According to seasoned fishermen, catching capacity has proved very head of tungsten in areas with rocky and shelly bottom which is hitting the jig plays a specific sound, additionally attracts predatory fish. With these weights, judging by the reviews, it increases the sensitivity of the gear. Such jig-heads are only collapsible. Their mass ranges from 1 to 10 g. are made not of pure tungsten, and of its alloys and metal. Unlike lead fishing products are much more expensive. According to the fishermen, the high price is the only drawback of such jig-heads.

On the rigging of brass

In addition to lead and tungsten, on the shelves with fishing facilities are available and brass weights. However, in the opinion of experienced fishermen to use such a head impractical. This recommendation is due to the fact that the brass alloy is soft enough. For jig is considered unacceptable because they communicated during casting often strike the rocky bottoms of reservoirs. Brass jig-heads after several outputs become completely unusable.

On the external design

Forms for jig-heads may be in the form of:

  • Bowl. Considered the most popular. Thanks to the universal form of snap-in can be used on any body of water.
  • a fish head.
Jig: types, description, selection of tips on how to use
  • Bullets.
  • The heads of the larvae. In the opinion of fishermen, these jigs are biting perch.
  • Spoons.
  • diggers. It has a recessed quick playback lures fish oscillation. Can move easily and bounce along the bottom. If fisherman performed bottom wiring head is moved in the horizontal plane waves.
  • Banana.
  • boots. On the tackle is well caught perch.
  • Horseshoes.
  • Skiing. Designed for reservoirs, in which a lot of thickets and snags. With this type of experienced fishermen are practicing speed wiring. Tackle can climb out of the water and glide over the surface, both on the track.
  • Petal. It has a smooth sinking effect. Judging by the reviews of owners, if you do the uniform wiring, petal will float in the water column above the other heads. When jerk guiding it quickly pops up to the surface. I catch on jig of this type of practice in shallow water.
  • Propeller.
Jig: types, description, selection of tips on how to use

to jig-head form a variety may be provided. The correct choice will depend on the comfort in the operation and effectiveness of the game. As experts recommend, for those who are going to fish in deep water or on the pond with a strong current, it is better to use heads with streamlined forms. When immersed in water which is less than the resistance.

About nezatseplyayka

As predatory fish predominantly deployed in dense thickets of snags and grass, fishermen often have to scour these sites. Just for such cases become indispensable tooling head-nezatseplyayka. There are two types of weights:

  • The products contain special wire antennae.
  • jig, which became the basis for the offset hooks.

About floating snap

Use these jig head on a pike. Also, using this type of weights you can catch perch and chub. Fish for predatory fish with silicone lures. The design weights allows them to be deployed in the surface layers, which is also called the fishermen in the environment "on the grass". Manufacturers as a raw material a variety of lightweight materials used for the head. Who wants to make the jig-head with your hands, can take advantage of a stopper podgruzhenny lead weights.

Stationary products

Considered classic jigs with rigid connection weights with hooks. Despite the fact that today there are options with a hinged, the popularity has not declined at all stationary. The advantage of the classic snap-in that the hook is always turned up a sting. Such an arrangement, according to experts, the most successful for effective cuttings. In addition, when performing transactions fisherman may not have to worry that the hook rests on the sinker ring and disturb bait animation. With stationary jig can be measured, smooth and stable game. Often, predatory fish starts to act without prior study of bait. Fishermen called such attacks "in flight." Such tactics can be expected mainly from the pike, which swallows the bait at the very moment when she performs movement. Zander and perch often snap-long learning. Dare to attack when the jig falls to the bottom. In this case, the stationary head lose sinker with hinged. This is due to the fact that when picked up from the bottom of the bait behind her and pulled sinker. Since the pond no object has the same density as lead or tungsten jig, these actions will cause the fish of suspicion. Jig inconvenient for distant throws. Time on their immersion takes longer. Judging by the numerous reviews, the fish can use rigid connection as a lever and hang on.

On the hinge

For these products provide connection ring in the ring, so that the weights given greater leeway. In this type of jig can move both forward and on the rotational path. The product is equipped with two lugs. Among fishermen such gear is also called "eared" and "Cheburashka". In one ear hook is attached to the second - folding clasp and forests. Tackle suited for long-distance casting. Also, with such heads fisherman has greater freedom of action: can compose different variants of baits, hooks, adjust the weight of the jig.

Rod ends can be:

  • non-separable. Heads are an early one rigidly soldered to a wire jig lugs.
  • collapsible. It is a modern version of the snap hinge. In the design of such products has a retractable wire, which is easy to make in the hooks.

In jig, the disposable head type is characterized by the arrangement of two lugs on the same plane. According to experts, the point of the hook have to be directed upwards. Therefore, many owners have to correct the arrangement of rings on their own with the help of pliers. Thanks to a special coupling element collapsible jigs can be made in 20 seconds. It is enough to remove the wire from the jig, make a hook and insert it back. Heads are arranged so that the pull wire fisherman can only in one direction. Plant hook conventional method which assumes its location sting up.

About noise sinker

These fishing items can both be used as a supplement to the bait, and be an independent part of it. The design of the heads are additional elements: the propellers and petals. During wiring such jig is reproduced sounds attract fish. Designed for surface wiring.

Jig: types, description, selection of tips on how to use

Rings

Depending on the location of the rings, jigs are balanced and unbalanced. In the first case, the placement ringlet became central Georgia, making it on the wood can take a horizontal position. Used primarily when the speed wiring. When a fisherman runs preroll fishing line, jig bends and swoops. Unbalanced head during stops begin to sink. Designed to perform uniform wiring and long casts. Mainly used in shallow water.

On the hooks

The most common are jig-heads, which are equipped with one hook. The fishermen call them single environment. High popularity due to the fact that at the time of posting this gear would not engage. Jig-heads are very comfortable in ponds with lots of snags. According to owners during the casting of single heads sometimes occur excesses of hooks for the forest. Forend hooks used in odinarnikah, is equipped with one, two or three special notches that provide better retention of baits.

Jig: types, description, selection of tips on how to use

Judging by the reviews of owners with such gear virtually nothing slips. Twins called jig-head with two hooks. These jigs are used with silicone and foam bait fish. For jig fishing hooks are provided with elongated fore-end. Also, the attention of fishermen presented head-ofsetniki. These tackles are equipped with special hooks that are called offset. With their help, created nezatseplyayka bait. Designed for use in very zakoryazhennyh reservoirs. Hook size can be very different. As experts recommend, to choose should be based on the size of baits, fishing conditions and fish activity. For the numbering of the hooks provided. The smallest number is considered to be the product of 10.

On the handicraft production of

Many fishermen use homemade products. Make the jig can be at home, copying of the product is already finished head. If the choice fell on the lead, then the master is necessary to prepare a special form for casting jig-heads. To do this, in any capacity knead plaster solution. Then apply thereto a sample jig which is previously necessary to lubricate. After this plaster should be given time to solidify. It is important that the product fit tightly. By performing these steps, the jig signature can be extracted and obtained in the form must be filled with lead.

What experts advise?

In order to collect the correct jig-head, the novice must adhere to the following guidelines:

  • If a twin-weights no split ring, the bait should fasten to one of the hooks, and the second outer side press twister.
  • You can also use an ordinary paper clip. It is not difficult to bend in the form of a hook, which is easy to spread the bait.
  • During installation, it is important not to damage the bait. Pierce needed it in the middle. Double hooks preferably pre loosen.
Jig: types, description, selection of tips on how to use

According to experts, when choosing a jig-heads should be considered pond depth and strength of the current. For transactions against current best use of the head with the increased load. It should also be remembered that with the reduction of incidence of bait on the bottom of the likelihood of bites increases significantly.