Comb-polisher Split Ender: reviews, photos before and after

For most girls split ends of hair - it's a real disaster, and the worst thing about this is that the occurrence of this problem, no superstrong reducing agents will not help and only needed their complete removal, and a new haircut is not always successful. It is for this reason that many holders of long hair are afraid to go to the hairdresser and even trim the ends. But if you do not take care of the hair as it should, with time comes just adversity. There is an exit! There is a device that allows you to get rid of this problem completely at home, and without loss of hair length.

Why do we need Split Ender?

This new invention was created and patented by Victor Talavera not so long ago, but has already gained a lot of fans around the world, as evidenced by the numerous positive reviews about Split Ender. One of its advantages is that it can be used both for home use and in the cabin.

Comb-polisher Split Ender: reviews, photos before and after

The tool is designed to eliminate split and dead ends. This invention features a new correction system that allows a sharp cut ends of the rotating knife in the desired direction, without loss of length. By means of special plates, and the comb teeth strand uniformly distributed on the plates and the careful removal occurs dry ends.

What is the Comb Split Ender?

In Split Ender installed patented Hair Plate, which has been specially designed for uniform and safe direction of the hair strands under the edge of the blade. Split Ender production goes to the United States. The device has passed all safety checks and have the appropriate certificates. Elektrorascheska is wireless and runs on batteries. The body is made of plastic and is somewhat similar hair iron for straightening, it is lightweight and easy switch buttons.

Inside the set:

sharp blade, which is protected by a plastic cover (6);
is embedded container for collecting cut hair (7);
can interval adjustment using interchangeable clamps - 0, 3, or 0, 6cm;
activation arrow keys (4);
locking the lock - button to change the clips (12);
handle clamp (13);
protective teeth (9, 10, 11);
ribbed rubber patches on the body, in order to avoid slipping (3).

the device mechanism is designed so that its use is safe, convenient and more effective than traditional scissors. "Split Ender" can accurately cut the ends, while maintaining the length that after the procedure remains the same.

Numerous reviews of Split Ender show that this procedure helps to achieve silky and luxurious hair for a few minutes.

Preparation for procedure

"Split Ender" will only work on clean and dry hair, so before applying you must wash your hair and dry them completely. During processing, you can not use sprays, gels, oils and styling. It should also be remembered that the procedure should be carried out to the extent of hair regrowth, daily use in the home is not required. After the treatment, it is necessary to thoroughly clean the container and store the device in a protective cover, dry and out of reach of children. If trimmer-comb is not used frequently, it is recommended to remove the battery during storage.

When applying this device in a passenger compartment is necessary to observe safety precautions and to handle customer hair with care. After each session, the device should be thoroughly cleaned and disinfected.

Instructions for use

Before the hair polishing session Split Ender and remove dead tips you need to make sure that no more intricate plots and mats to avoid the strong tension. Further:

to separate the small strand of thin;
the remaining hair tied in a ponytail;
strand should once again comb and place on top of the plate with a comb - this will allow the hair loosely and evenly spaced under the sharp knives;
gently squeeze the hair into the device and press the start button, the sound of a particular point to the start of work;
slowly lightly from roots and moving to the ends to hold the strand;
each strand must be treated at least three times.

Professional reviews about Split Ender indicate that after clipping the hair is no longer obey and pushitsya.

Recommendations

During the session elektrostrizhki should remember:

At the top of the "Split Ender" comb teeth are arranged and processed curl should not be thicker than their size.
If during processing it is felt that the hair pulling, either too much hair in the device, or they are ill-combed. You must turn off the unit, remove the lock, comb, and if necessary to take less hair and try again.
After processing one side of the head, switch the side key on the left to right or vice versa, and cut their hair, focusing on the directional arrows, which should point down.
It is necessary to monitor the filling of a plastic chamber and clean it in time to avoid overflow.
In the first application device is recommended to set the size of 0 to 3 cm.
As we move away split ends to make sure that was brushed Split Ender all strands.
Trimmed strands need to collect pins or clips to prevent them from mixing with the not yet well developed areas.

A shearing result can be seen in the photo (before and after). Reviews of Split Ender warn against misuse, which can lead to pull-out and the formation of new hair split ends.

Why stylists worth trying this device?

First, this tool is recommended to purchase for salons and hairdressers, as the majority of people trust their beauty professionals and will be able to get high-quality service with a personal touch in a cozy atmosphere.

Secondly, comb effectively eliminates the split ends, while maintaining the maximum length of the hair.

Third, the professional stylist will be able to hold a session most efficiently.

Fourthly, this device will save considerable time and remove the 99% cross-section of the tip, cutting off all of 0, 3 and 0, 6 cm damage.

Fifth, polishing comb quite expensive and not everyone can afford to buy it, but in terms of interior its cost quickly pays for itself.

Makeup artists, hairdressers should remember that before you start to offer its customers a haircut, you must be trained to acquire the necessary skills, which is especially important for long hair.

Reviews Split Ender by beauty-masters only positive. Hairdressers noted the high quality of treatment and the possibility of expanding salon procedures.

Why restore hair ends?

Damaged areas of the hair tips make life miserable as the poor quality of hair frustrates every woman. Even though expensive care, there is no guarantee of getting rid of this unpleasant moment. Split ends can appear even on the hair, which seem to be perfectly healthy, as well as the problem often arises from the nature of the owners thin hair. The main reasons for the appearance of split ends - is:

wrong combing;
low-quality shampoos;
crude styling;
aggressive dyes;
influence of sunlight and hot ironing.

to shrug off this problem is impossible, as is hair imperfection can lead to disaster. Positive reviews of the comb Split Ender allow to ensure the effectiveness of this invention. Regular grooming will put an end to the damaged areas, making a neat hairstyle. After elektrostrizhki:

hair easy to comb;
uniformly stained;
look beautiful and shiny;
is less broken.

How do the results?

Prof. reviews of Split Ender comb is recommended to treat the hair in such a way after a perm, coloring and permanent use of hot styling instruments. Do not be afraid that the hair from frequent haircuts become shorter, on the contrary, they will grow even faster. The effect of using a comb "Split Ender" lasts approximately 4 weeks, but its effect can be extended by the use of nutritional care products and the right styling.

Reviews Split Ender

Most of the reviews about this device are very positive, many women say a good result from the use of this technique.

For obvious reasons, first, people do not believe that this device can replace professional hairdresser hands, but when he was become, after the first application of fall in love with "Split Ender." He copes with long hair and even better than the specialist removes the damaged ends. Included with the device is supplied brush for cleaning the container, a comb and cover in order to make it convenient to use and store. With "Split Ender," you can quickly process the entire head, but first you need to practice. It is important to remember that in this case the hair must be dry. The whole process takes about 30 minutes, and one of the main advantages of this device is that it is wireless and lightweight, which is very convenient. When processing your hands do not get tired, and the stand allows it to be positioned comfortably. To recharge the need to buy AA batteries.

Many girls say that are happy to have found such a device for cutting, which allows you to save the hair centimeters and release from a hike in the salon. Although the price is high, comb will significantly save on salon services.

Reviews Split Ender Pro majority of customers who have already purchased the tool, the positive features of note. It:

beautiful salon result;
ease of use;
compact;
prompt removal of split ends;
the maximum preservation of the hair length;
after a session of hair begin to grow faster;
no problems with scratching, they do not get confused and become a perfect smoothness and shine.

In the reviews of the Split Ender hairdressers and makeup artists and noted a few drawbacks:

a high price;
frail body, so the device should be used carefully;
while turning the audible specific too noisy sound.

Where to buy?

Numerous reviews of the comb Split Ender by split ends talking about various things, but it's worth noting that the manufacturer of this device warns against counterfeits, which are made of poor quality and can greatly harm the hair. When choosing the store where you purchased this device will need:

carefully read the opinions of users who have completed the purchase of this resource;
to draw attention to the product description, which should be detailed;
with the item card must be provided certificates;
presence of guarantees.

In addition, before the acquisition should think twice, as often this item can not be returned. And in order to determine, it is necessary to look at Instaliga helpful videos and Youtube.

This unique tool can be found in many online stores, but remember that buying low-quality products, you are risking the beauty and health of hair. Therefore, this must be ordered from the official representatives of the comb and reliable resources. Based on a review of the comb from split ends Split Ender, you can select such stores as Splitenderpro, Bellissima, Meleon.

Specifications

Power - 50W.

Color: silver, pink, black, red.

Material - plastic.

Blades Hair Plate system.

Options

In addition to the good results, often in a review of the comb-Polisher Split Ender can meet an enthusiastic mention of its configuration, which does not require the purchase of additional accessories.

In addition to the tool, included in the package: