How to collect the bait properly. Tips for assembling the float, and the bottom of the feeder rod

Fishing - it's not just a pastime, a hobby, a passion, sport, leisure from annoying routine. But few know the basic techniques of catching a particular species of fish. Success largely depends on the correct choice of rod and tackle, reservoir characteristics. A fishing process itself begins not throw, but with the rod assembly. To learn how to properly collect the bait, it will be discussed below.

What is the float ud

Float rod - this is probably one of the simplest of fishing gear, which prefer to use the budding anglers. It is inexpensive and easy to handle. Of course, even novice fishing fans need to know how to collect the bait and what parts it consists of.

In a conventional float oud can be divided into three parts:

1. The rod - is the foundation of any rod, which has the shape of a long, thin cone. It is isolated thicker part - the butt and the thin opposite end - vershinku. For the butt you need to keep the rod when fishing, and fishing line is attached to the apex. Fished may be either integral (one piece connected to the other) and a telescopic. Its length may vary depending on personal preferences fishing fishing equipment used, the type and characteristics of fish pond.

2. The line - it is attached to the tips of Udy. To thin the tips it is attached with a plastic buckle connector or a small cord. In the case of colon vershinki fishing line is attached to a special ring. If any attachment is missing, you can manually primotat loop of thick fishing line. It will not make any difficulty, especially if you've done it before and know how to collect the bait.

3. Attachments includes a float, a hook and a sinker. Float is not only used for about pokleve alert, but in order to hold the hook in the desired depth. Aysvehu sinker same levels and provides the necessary hook achieve depth.

How to build a float rod

First you need to mount rod. If it is composite, it should be gently inserted part of each other. If fished telescope, then you just need to pull his side and secure. The main thing - do not overdo it with force, otherwise then it will be very difficult to collect the bait back. Also, when buying Udy should pay attention to whether there is an instruction - it can also be described as the right to collect the bait of the model that you purchase.

Then you need to find a suitable scaffold. Its thickness will depend on what kind of fish is supposed to catch. For normal coastal fishing, usually the fishing line is enough thick 0, 2 mm, which can easily support a load of up to 2 kg.

Build bezkatushechnoy Ud

If you use the rod without the reel, the fishing line must be attached directly to the apex. If the ring is found, it is bound to it or fastened special fastener. If the connector is used for fixing, it is adhered to the tips, then it is attached to the fishing line. Keep in mind that it must be longer than the rod 15-20 cm.

Then the main line to be equipped float. It is fixed by means of special stoporkov (tubing), which is usually accompanied by instructions for their mount. Next, join the sinker (slightly below the float). Its mass is chosen so as to aysveha dropped into water to said at its antennke mark. To make it easier to navigate, choose to store such floats, which specified the required weight of the sinker. Finally, you need to attach a hook. It is linked to the very end of the fishing line fishing knot. It remains to put bait on a hook - and you can start fishing.

How to build a fishing rod with a reel

To process the fish angling from the shore or a boat was more comfortable, float hook can be equipped with a small coil, which must first be wound sufficiently large number of fishing line. It provides flexibility and ease of rigging. Coil type is selected depending on the type of fish and casting distance.

How to build a fishing rod with a reel? The process itself is slightly different from that described above. First, one end of the fishing line you want to link directly to the coil and turn the handle to wind it at least 40 m. Then, the coil must be installed on a hook by means of the existing attachment. Then the fishing line is threaded through the rod rings, and then it joins the float weights and podvodok hook. The length of the hoses should be 25-30 cm.

What is the ground fishing tackle?

How to collect the bait, much depends on the type and purpose. Bottom fished or donk, combines several types of fishing gear: classic donk Podpusk, "Carousel", zakidushka, seine, koltsovki, "gum" and many others. Common to all these species - the possibility of fishing from the bottom, as well as versatility, since this rod is suitable for any fish.

The simplest bottom ud consists of rather a short rod (1 m), which is equipped with a coil or with a reserve fishing line motoviltse at least 35 m long, and the sinker and the hook leashes. Udilnik often make their own from not too thick wooden or bamboo branches of juniper. At the thin end knotted loop (at both the float rod), and the thick end is sharpened in the form of a peg and driven into the ground. Experienced anglers often gather donk themselves.

Features in assembly

To understand how to put together a ground fishing tackle, it suffices to consider a few highlights. Many fishing enthusiasts prefer to keep the fishing line on the spool or motoviltse styrofoam or plywood, and the rod is made directly on the bank of any branches growing near trees.

But in order to preserve nature, it is better to do otherwise - to make advance udilnik from scrap materials. It can be stored at home, as it will last for several seasons and will not take up much space. To equip the simplest Donkey fits any fishing line (as long as it has withstood the weight of the intended fish).

By the choice of the mass and shape of the sinker should be approached more responsibly. If fishing is conducted in a pond with a flat bottom, it is best to use a heavier sinker (you can throw away from the shore, where fish will be driven). In the case of a lake, pond or river with a small course better to use lighter weight material. For bodies of water with a rocky or muddy bottoms fit weights rounded shape. But for the river with a strong current and a sandy bottom most practical flat sinkers - they are better "lie." As a ground fishing tackle can be equipped with various devices: a trough, the lodge with a bell, a safety elastic band and many others.

What is the feeder

Increasingly popular among avid fishermen becomes a feeder rod. Feeder, or English donk - a more advanced version of the familiar to all bottom Udy. Experienced anglers know very well how to build your own bait feeder, but the novice amateur fishing business can not do without some instructions.

For fishing at the feeder is generally used inertialess spool with a large diameter spool. This will minimize the friction cord that will provide the maximum casting distance. Instead, the cord can be used and the usual fishing line. It just threaded through udilnika ring is attached to the spool and is wound onto a reel. Lesy need wind as much as possible, almost to the edges of the coil.

Several features in the assembly of

It is best to use rods made specifically for the feeder, it is possible to use conventional, length 3, 6 m, and the dough in an amount of about 80 grams. The feeder casing generally consists of a plastic tube with mounts of weights and the actual weights trough. The preferred use feeders that are already aligned with the sinker.

First, the fishing line (or network) is passed through the outlet, and then have to stop and put on a snap swivel, then attach the load and the feeder. Then it is necessary to tie leashes with hooks. You can also add a bite alarm.

Before you assemble the bait, it is necessary to determine the type of fish that is supposed to catch, with a reservoir type and method of fishing. Then fishing will bring not only a nice holiday, but also a great catch.